|Place of Origin:
|AX 3030B DS/AX 4545B DS/AX6060B DS/AX6060C DS
|Minimum Order Quantity:
|Plywood pallet; steel pallet; customer-specified
|L/C, D/A, D/P, T/T, Western Union, MoneyGram
|2000 Ton/Tons per Month
|En124-2 C250Manhole Cover Rectangle
|Bituminous Paint/Water-based Paint
|According To Drawings
rectangular manhole cover,
Square Manhole Cover Ductile Iron EN GJS500-7 Solid Top Double Seal
Ductile iron castings have been used in almost all major industrial sectors, requiring high strength, ductility, toughness, wear resistance, resistance to severe thermal and mechanical shocks, high or low temperatures, corrosion resistance and dimensional stability. In order to meet these variations in the conditions of use, there are many grades of ductile iron available, providing a wide range of mechanical properties and kinematic properties. Most ductile iron castings, as defined by ISO 1083, are mainly produced in non-alloyed state. Obviously, this range includes high-strength grades with tensile strength greater than 800 Newtons/mm and elongation of 2%. QT500-7, a general-purpose material for ductile iron manhole covers, has a Brinell hardness of 170-230HB. The other extreme is a high-resistance grade with an elongation of more than 17% and a correspondingly low strength (minimum of 370 N/mm scoop. Strength and elongation are not the only roots of the designer's choice of material, while other decisive important properties Also included are yield strength, modulus of elasticity, wear and fatigue strength, hardness and impact properties. In addition, corrosion resistance and oxidation resistance and electromagnetic properties may be critical to the designer. To meet these special uses, a group has been developed. Austenitic ductile iron, usually called Ni-Resis, is a ductile iron. These austenitic ductile irons are mainly alloyed with zinc, chromium and manganese and are listed as international standards.
From class A15 to class F900, we can totally produce them and also produce some special covers according to customers’ asks. According to material, Square manhole covers can be divided into four groups-metal manhole covers, cement-based composite, Recycled resin composite manhole cover, Polymer matrix composite manhole cover etc. All manhole covers totally meet with EN124-2 standard, which is widely used Global market.
|Solid Top Manhole Cover Double Seal B/C SQUARE
Material:Ductile iron EN GJS500-7
|AX 3030B DS
|AX 4545B DS
Standards and features:
1. high strength. Tensile strength σs≥420MPa, yield strength σs≥300MPa, same as low carbon steel, three times that of gray iron
2. Good toughness. The impact value is similar to that of medium carbon steel, which is more than 10 times that of gray iron material.
3. Good plasticity. The elongation is as large as 7%, which is similar to high carbon steel, while the gray iron steel has an elongation of zero.
4. Strong corrosion resistance. In the water spray corrosion test, the corrosion amount in 90 days is only one tenth of that of the steel pipe, which is one tenth of that of the gray iron pipe. The service life is twice that of gray cast iron, which is 5 times that of ordinary steel pipe.
Contact Person: Daniel.du