Square Aluminum Manhole Cover V-Type Supports Welded Re Inforcements

Description:

aluminum recessed cover is a smell and waterproof aluminum inspection cover. The inspection covers are expertly provided with two seals: two seals at the base.

aluminum series is available in three different heights: 55mm – 80mm – 100mm. This makes it easy for the contractor to select the right inspection cover for each application.

In addition to the standard dimensions of 200x200mm to 1000x1000mm, we also offer special bespoke solutions.

Applications:

floor,road,driveway,garden,park,Industry,Construction and public use,etc.,etc.

How to install an Inspection cover

Step 1:

Remove the cardboard corners and check if there are any damage. Place the cover in the correct position. Apply concrete fillers evenly and adequately on the edge of the frame. Make sure there are no cavitations in concrete, because these cavitations may adversely affect the density of the protective layer or bend under load.

Take into account the final finish layer. Use the level to take the cover to the right height.

Step 2:

Give the concrete plenty of time to harden (at least 48 hours) and open the cover when the concrete is 90% hard. Remove any concrete or other residue on the frame or recessed cover.

Step 3:

Apply the concrete filling to the recessed cover evenly, and place the reinforcement mesh in the right position: make sure it does not touch the bottom or sides.

Take care the height of the finish layer again.

Step 4:

Lay the pavers, tiles or other finish and fill the joints.

Specifications:

Competitive Advantage:

Our main range of manhole covers with aluminium provide internally and externally use for floor,road,driveway,garden or show rooms and other areas where the best aesthetic finish is required.

.Frame & cover are made of extruded aluminium profile and galvanized stainless steel

.Easy to lift with threaded lifting keys

.We can follow your dimentions and requirements per your design.